FEATURES: Construction: Foam Wings: One-piece reinforced Radio: Tactic FM 72MHz 4-channel with trainer switch, Futaba compatible trainer jack, charge jack for optional NiCd pack, 6-ch receiver, three micro servos, aileron, rudder and elevator control single servo aileron control Electronic Speed Control: 15A 6-7 NiMH compatible with auto cut-off Motor: 380 size Landing Gear: Prebent 0.059" (1.5mm) thick aluminum with prebent wire nosegear Wheels: Three 1" (25mm) diameter foam Propeller: Two 7x3, one installed and one spare Spinner: 1" (26mm) diameter, black in color Battery: ElectriFly 7N-J 7-cell 8.4V 1100mAh NiMH (GPMP7700) with red 2-pin connector Charger: 12V DC peak (GPMM7700) Cowl: ABS plastic Wheel Pants: ABS plastic Warranty: Hobbico guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification. INCLUDES: FlyZone Cessna 182 Skylane Airplane with 380 size motor, two 7x3 prop, spinner, 4-ch FM radio w/3 micro servos, 6-ch receiver, ElectriFly battery and charger, electronic speed control, phillips head scewdriver and illustrated instruction manual REQUIRES: AA Batteries: Eight for transmitter SPECS: Wingspan: 34.8" (880mm) Length: 26.5" (675mm) Center of Gravity (CG): Prebalanced at factory but should be confirmed using the following procedure; Place marks on bottom of wing between 1-7/16" (36mm) and 1-3/4" (44mm) back from the front of the wing next to the fuselage. Lift airplane with fingertips, it should balance between the marks. If it doesn't balance within this area, weight must be added to nose or tail. Control Throws- Ailerons, Up and Down: 3/16" (5mm) Elevator, Up and Down: 5/16" (8mm) Rudder, Right and Left: 3/8mm (10mm) COMMENTS: To use trainer function, order the Futaba Micro to Micro Plug Trainer cord (FUTM4415). Trainer system is compatible only with a Futaba or Tactic brand radio system.
|